Wakesurf Boards for Sale
It is currently Fri Apr 20, 2018 8:17 pm

All times are UTC - 6 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Custom GPS controlled surfgate setup
PostPosted: Sat Mar 31, 2018 9:01 am 
Offline

Joined: Mon Mar 12, 2018 9:44 pm
Posts: 5
I just picked up a 2013 A20 and am adding surf gates onto it.

I wrote arduino code to automate the actuators via GPS speeds and shared it on github incase anyone wants to check it out.

Source: https://github.com/jonthompson/surfgate

For a basic version for <$50 you can put together the control system -- obviously the tabs/actuators are another $500+

The "simple" version that is up makes use of:
1 Arduino mega ($10 @ Microcenter)
1 GPS module w/antenna $25 - https://www.amazon.com/dp/B01MRNN3YZ/re ... UTF8&psc=1
1 L298N module for a simple H bridge to control actuator relays - $7 https://www.amazon.com/Diymall-Module-S ... 00NJOTBOK/ (These JUST control the relays, NOT the high draw actuators - this was to keep it simple and avoid having to solder anything custom)
3x momentary LED backlit push buttons to control modes ($5 off ebay.)

Then:
Add standard marine relays + lenco actuators (~$170 each) and make some tabs - and you've got a custom GPS speed controlled surfgate

Basic features: 3 buttons (surf left, surf right, off) - tabs automatically deploy at set speeds (IE: >7mph and <14mph.) If you hold the buttons for a second it enters "override" mode to force deploy of that tab.

I have a more complex version that has an OLED screen + wifi module for phone control/settings via app + RF control for a custom surf band that I'll share there as well once i clean the code up and document it some.

If anyones interested in adapting this on their boat let me know - I have a full wiring diagram I'll share on the github project as well!


Top
 Profile  
 
 Post subject: Re: Custom GPS controlled surfgate setup
PostPosted: Tue Apr 03, 2018 2:14 pm 
Offline
User avatar

Joined: Sun Feb 26, 2017 12:27 am
Posts: 4
Location: Quebec/Canada
I'm looking exactly about a wifi module and remote. For sure I'll be interest in your diagram as well!

_________________
English is my second language! I'll do my best!


Top
 Profile  
 
 Post subject: Re: Custom GPS controlled surfgate setup
PostPosted: Wed Apr 04, 2018 12:02 pm 
Offline

Joined: Mon Mar 12, 2018 9:44 pm
Posts: 5
Carbo86 wrote:
I'm looking exactly about a wifi module and remote. For sure I'll be interest in your diagram as well!


I'll put it together this weekend - traveling this week. The part list is pretty straight forward if you want to grab that in advance. The remote i need to rework as the bluetooth remote i was using is no longer for sale - but it's a simple mod to just straight RF.


Top
 Profile  
 
 Post subject: Re: Custom GPS controlled surfgate setup
PostPosted: Tue Apr 10, 2018 7:47 pm 
Offline

Joined: Tue Dec 13, 2016 12:13 pm
Posts: 19
Location: Minnesota
i am looking to add a surf gate setup to my 2011. Last year i narrowed my platform to make room for tabs. now i just need to build and add the tabs, id love if someone had this all figured out like you seem to. would you consider building a controller? also have you built your tab system to show it working in a video! this is all exciting lol

_________________
2011 Axis A22 VANDALL, BLK


Top
 Profile  
 
 Post subject: Re: Custom GPS controlled surfgate setup
PostPosted: Wed Apr 11, 2018 3:53 am 
Offline
User avatar

Joined: Sun Feb 26, 2017 12:27 am
Posts: 4
Location: Quebec/Canada
Thipps wrote:
i am looking to add a surf gate setup to my 2011. Last year i narrowed my platform to make room for tabs.


How do you process for re-shaping your swim plafform? Do you have any picture? Have to do mine too!

_________________
English is my second language! I'll do my best!


Top
 Profile  
 
 Post subject: Re: Custom GPS controlled surfgate setup
PostPosted: Wed Apr 11, 2018 6:55 pm 
Offline

Joined: Tue Dec 13, 2016 12:13 pm
Posts: 19
Location: Minnesota
here are the pictures i have. if i remember i cut like 5 inches of width out of it near the boat and the outside corners were like 16 inches narrower. it was fiberglass work so it wasnt pretty during the process but i used it all year and it worked great. it took a ton of time but its worth it. I also had a custom sea deck made for it so it looks factory.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

_________________
2011 Axis A22 VANDALL, BLK


Top
 Profile  
 
 Post subject: Re: Custom GPS controlled surfgate setup
PostPosted: Wed Apr 11, 2018 10:29 pm 
Offline

Joined: Mon Mar 12, 2018 9:44 pm
Posts: 5
Thipps wrote:
i am looking to add a surf gate setup to my 2011. Last year i narrowed my platform to make room for tabs. now i just need to build and add the tabs, id love if someone had this all figured out like you seem to. would you consider building a controller? also have you built your tab system to show it working in a video! this is all exciting lol


(Nice fiberglass work!!)

I actually just picked up a 2013 a20 this spring - so I haven't put the tabs on mine yet as I need to prototype in the water to get the placement right with my slightly-larger-than-a-2014 platform (trying to avoid having to cut down my platform..) but the controller itself is all built and ready to go.

I originally built the controller last fall for a friends boat and it worked great for the season (replaced his manual trim tab buttons.) I refined it some this winter and need to upload the latest code to github that adds a bunch of functionality..

Ice will be out in the next month or so up this way and I can get some video of the controller in the water then on his boat.

I'd be happy to ship the arduino out pre-flashed at cost if that's a concern ($10 from microcenter +shipping) - if you have any soldering skills it's not too difficult. I don't think a screw shield on the arduino would work well bouncing around - maybe epoxied it'd be ok but you'd still need to solder a few parts. I can't offer to build em for folks, I know I wont have the time - but i can try to help if anyone has any questions along the way!

Sorry I haven't had a chance to put up the wiring diagram yet - traveling this week and for the next two but i'll get to it in the next few weeks when my schedule calms down some.. I also dont have access to my boat until early may so that's slowing things down!


Top
 Profile  
 
 Post subject: Re: Custom GPS controlled surfgate setup
PostPosted: Thu Apr 12, 2018 2:54 pm 
Offline
User avatar

Joined: Sun Feb 26, 2017 12:27 am
Posts: 4
Location: Quebec/Canada
Thipps wrote:
if i remember i cut like 5 inches of width out of it near the boat and the outside corners were like 16 inches narrower. it was fiberglass work so it wasnt pretty during the process but i used it all year and it worked great.


Wow! Nice work! I'm questionning myself if I cut mind or build a teak deck. I never work with fiberglass and i'm definitely better with wood working!

jtnorway wrote:
Ice will be out in the next month or so up this way and I can get some video of the controller in the water then on his boat


No worries, there's still 4feets of ice here! :cry: I already order all the parts that you tell on your first post, should get my stuff around next week or so.

_________________
English is my second language! I'll do my best!


Top
 Profile  
 
 Post subject: Re: Custom GPS controlled surfgate setup
PostPosted: Thu Apr 12, 2018 2:58 pm 
Offline

Joined: Tue Dec 13, 2016 12:13 pm
Posts: 19
Location: Minnesota
Carbo86 wrote:
Thipps wrote:
if i remember i cut like 5 inches of width out of it near the boat and the outside corners were like 16 inches narrower. it was fiberglass work so it wasnt pretty during the process but i used it all year and it worked great.


Wow! Nice work! I'm questionning myself if I cut mind or build a teak deck. I never work with fiberglass and i'm definitely better with wood working!

jtnorway wrote:
Ice will be out in the next month or so up this way and I can get some video of the controller in the water then on his boat


No worries, there's still 4feets of ice here! :cry: I already order all the parts that you tell on your first post, should get my stuff around next week or so.




its messy thats for sure but its forgiving.i probably have 40 hours or so into it by the time i had it painted but like i said it looks factory.

_________________
2011 Axis A22 VANDALL, BLK


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: