It is currently Thu Mar 28, 2024 8:22 am

All times are UTC - 6 hours





Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Help wiring amp to rev10's
PostPosted: Thu Feb 23, 2017 3:38 pm 
Offline
Team Axis

Joined: Thu Jan 08, 2015 6:29 pm
Posts: 538
Location: Ohio
Hey guys,

I'm having an issue with my amp/speakers I'm installing.

I have a ppi 900.4 amp bridged to a pair of Rev10's.

I have a clicking noise with HU volume all the way down. I also have a crackle/pop when turning the amp off. What does this mean?

Also, to bridge it I just to positive to negative on opposite channels, right?

Any idea what settings I should have on the amp?

TIA

_________________
2015 T22 - SOLD


Top
 Profile  
 
 Post subject: Re: Help wiring amp to rev10's
PostPosted: Thu Feb 23, 2017 4:11 pm 
Offline
Team Axis

Joined: Sat Jun 06, 2015 10:35 pm
Posts: 1181
Location: Sammamish WA
Isn't that amp only 4 ohm stable bridged? How are you running it?

Sent from my SAMSUNG-SM-G925A using Tapatalk

_________________
-2015 A24 - 409 HP - 2249 Prop - 1100 rear sacs - 950 front sac - 290lb rider with Red Rocket and Phase 5 Quest


Top
 Profile  
 
 Post subject: Re: Help wiring amp to rev10's
PostPosted: Thu Feb 23, 2017 4:36 pm 
Offline
Team Axis

Joined: Thu Jan 08, 2015 6:29 pm
Posts: 538
Location: Ohio
r33pwrd wrote:
Isn't that amp only 4 ohm stable bridged? How are you running it?

Sent from my SAMSUNG-SM-G925A using Tapatalk


The amp is only stable 4ohm bridged. That's what the speakers are.

I have both negative speaker wires to the front left negative and both positive speaker wires to front right positive.

Is that not right? How should my speaker wiring hook up to amp?

_________________
2015 T22 - SOLD


Top
 Profile  
 
 Post subject: Re: Help wiring amp to rev10's
PostPosted: Thu Feb 23, 2017 8:48 pm 
Offline
Team Axis

Joined: Sat Jun 06, 2015 10:35 pm
Posts: 1181
Location: Sammamish WA
Pretty sure that is a 2 ohm load..

Sent from my SAMSUNG-SM-G925A using Tapatalk

_________________
-2015 A24 - 409 HP - 2249 Prop - 1100 rear sacs - 950 front sac - 290lb rider with Red Rocket and Phase 5 Quest


Top
 Profile  
 
 Post subject: Re: Help wiring amp to rev10's
PostPosted: Thu Feb 23, 2017 8:53 pm 
Offline
Team Axis

Joined: Sat Jun 06, 2015 10:35 pm
Posts: 1181
Location: Sammamish WA
Assuming you are hooking up 2 speakers to one bridged channel it is 2 ohm. I don't think u can do 2 4 ohm at 4 ohm load?

Sent from my SAMSUNG-SM-G925A using Tapatalk

_________________
-2015 A24 - 409 HP - 2249 Prop - 1100 rear sacs - 950 front sac - 290lb rider with Red Rocket and Phase 5 Quest


Top
 Profile  
 
 Post subject: Re: Help wiring amp to rev10's
PostPosted: Thu Feb 23, 2017 9:35 pm 
Offline
Team Axis

Joined: Thu Jan 08, 2015 6:29 pm
Posts: 538
Location: Ohio
Ok yeah I found out from searching online that was wrong. I now have it wired positive to front right positive and front left negative for one speaker and the same way for thas other speaker but on the rear channel. According to the wiring diagram online I found that would bridge the 2 front channels to one speaker 450w at 4 ohms and the 2 rear channels to the other speaker 450w at 4 ohms. Sound right?

_________________
2015 T22 - SOLD


Top
 Profile  
 
 Post subject: Re: Help wiring amp to rev10's
PostPosted: Fri Feb 24, 2017 12:04 am 
Offline
Team Axis

Joined: Sat Jun 06, 2015 10:35 pm
Posts: 1181
Location: Sammamish WA
Yes that sounds right.. I thought you had 2 speakers on one channel...

Sent from my SAMSUNG-SM-G925A using Tapatalk

_________________
-2015 A24 - 409 HP - 2249 Prop - 1100 rear sacs - 950 front sac - 290lb rider with Red Rocket and Phase 5 Quest


Top
 Profile  
 
 Post subject: Re: Help wiring amp to rev10's
PostPosted: Fri Feb 24, 2017 6:17 am 
Offline
Team Axis

Joined: Thu Jan 08, 2015 6:29 pm
Posts: 538
Location: Ohio
Cool. Appreciate the help. Now I just need to figure out why they make a crackle/pop noise when the amp shuts off.

_________________
2015 T22 - SOLD


Top
 Profile  
 
 Post subject: Re: Help wiring amp to rev10's
PostPosted: Fri Feb 24, 2017 8:30 am 
Offline
Team Axis

Joined: Sat Jun 06, 2015 10:35 pm
Posts: 1181
Location: Sammamish WA
ThatGuy wrote:
Cool. Appreciate the help. Now I just need to figure out why they make a crackle/pop noise when the amp shuts off.

No help there man..

Sent from my SAMSUNG-SM-G925A using Tapatalk

_________________
-2015 A24 - 409 HP - 2249 Prop - 1100 rear sacs - 950 front sac - 290lb rider with Red Rocket and Phase 5 Quest


Top
 Profile  
 
 Post subject: Re: Help wiring amp to rev10's
PostPosted: Fri Feb 24, 2017 8:40 pm 
Offline
Team Axis
User avatar

Joined: Mon Oct 12, 2015 8:10 pm
Posts: 480
Location: San Tan Valley, Arizona
Where is the HU grounded? Are you running an EQ?

_________________
2003 Sanger V210....SOLD
2005 MC X2....SOLD
2006 MC XSTAR....SOLD
2016 AXIS A20....SOLD
2018 AXIS T22....CURRENT


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: