Axis Wakeboard Boat Forum http://axiswakeboardboats.com/ |
|
Kicker tower speaker clamps? http://axiswakeboardboats.com/viewtopic.php?f=15&t=4521 |
Page 1 of 1 |
Author: | jtnorway [ Wed Mar 14, 2018 7:54 pm ] |
Post subject: | Kicker tower speaker clamps? |
Hi I just picked up a new-to-me 2013 Axis A20 and wanted to be ready for spring to put some cheapish tower speakers on for surfing (nothing HLCD to annoy my neighbors.) I ended up picking up a good deal on a kicker KMT67 set and an amp but i just realized the tower bar is 3" and the kicker mounts only go up to 2.5". Piecing it together with a longer screw and a gap on the mount is going to look pretty crappy... I haven't found any replacements that will definitely work -- one may work but was $50 each clamp (4 clamps) which is almost what I paid for the speakers.. Any suggestions on a workaround for this? Or do I just return them and start over? Edit: swear i searched and didnt find anything but i see this is a common question -- most of the answers are buy wet sounds or exile as they come with 3" clamps. Any other ideas would be great! Edit2: Spoke with Kicker and they dont make larger clamps and none of the third party ones I can find will fit - so it has to be returned unfortunately. They do have a few new ranges of coaxial and HLCD speakers coming out soon which support bars up to 3.5" - http://www.kicker.com/kmtc-series |
Author: | 80AMT23 [ Tue Mar 20, 2018 2:57 pm ] |
Post subject: | Re: Kicker tower speaker clamps? |
What was the one you found that may work? I might spring for that? |
Author: | jtnorway [ Tue Mar 20, 2018 7:36 pm ] |
Post subject: | Re: Kicker tower speaker clamps? |
80AMT23 wrote: What was the one you found that may work? I might spring for that? For the clamp? Upon review, none would work without somewhat major mods to the kicker enclosures since the mount was sunk and would cost quite a bit for the mounts since there were 4. It would have been a pain and look awful. If anyone just wants enclosures the best option I could find was https://www.bulletlines.com/Wakeboard-T ... -p/206.htm (also in black) with their larger clamp options. All the new kicker models that are coming out for 2018 work up to 3.5" bars -- link: http://www.kicker.com/kmtc-series But they are new - none are available yet. I will likely pick up a set of WS icon 8's instead. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |