It is currently Sun Apr 28, 2024 6:29 pm

All times are UTC - 6 hours





Post new topic Reply to topic  [ 53 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next
Author Message
 Post subject: Acme 2079 prop
PostPosted: Sun Apr 07, 2013 9:04 am 
Offline

Joined: Thu Apr 04, 2013 9:46 am
Posts: 6
So I just got the jumbo fat sacks 1100'2 and was wondering what prop I should order? I've been looking at the Acme 2079. I already own the 1235. Does anybody else have the 2079? Any suggestions would be great.


Top
 Profile  
 
 Post subject: Re: Acme 2079 prop
PostPosted: Sun Apr 07, 2013 1:15 pm 
Offline
Team Axis
User avatar

Joined: Thu Jan 06, 2011 9:47 pm
Posts: 634
sorry stuart, I too have been wanting some feedback on this prop. I think there are a couple guys on here with a 2079 but not sure if they have been able to use their boats yet.

If you can, will you go load up your ballast and do a couple timed runs from say, 0-23, note the RPM's at 23 mph, and get us a top speed of your 1235. Then when, or if, you get the 2079, do the same exact thing?

_________________
John
2011 A22


Top
 Profile  
 
 Post subject: Re: Acme 2079 prop
PostPosted: Sun Apr 07, 2013 2:26 pm 
Offline

Joined: Thu Apr 04, 2013 9:46 am
Posts: 6
It's going to be a few weeks till I get my boat in the water. I called ACME and they also recommended this prop as my best option. I think Im going to pull the trigger on it anyway but was hoping for some feedback on the 2079. If/ when I get it, I will let everybody know my thoughts on the 2079. I was reading that for over 3000 lbs this is my best option and I can still get speed over 30 mph if need be.


Top
 Profile  
 
 Post subject: Re: Acme 2079 prop
PostPosted: Sun Apr 07, 2013 6:27 pm 
Offline
Team Axis

Joined: Fri Aug 17, 2012 1:18 pm
Posts: 435
Location: OKC
I just ordered a 2315 along with two sumo 900's in the back. My boat is currently tore down. I'm halfway through the dripless shaftseal install. I had a bitch getting the v-drive cooling hoses off!
When I'm done, I'll take mine out fully loaded and see what time I get. You should be relatively similar with the 2079.


Top
 Profile  
 
 Post subject: Re: Acme 2079 prop
PostPosted: Sun Apr 07, 2013 8:09 pm 
Offline
Team Axis

Joined: Mon May 23, 2011 11:02 am
Posts: 1849
Location: Copperas Cove, TX
Will the 1235 even get the boat on plane with BOTH 1100's full plus all tanks and bow sac with crew?

_________________
2014 A24
2011 A22 (sad to see her go)


Top
 Profile  
 
 Post subject: Re: Acme 2079 prop
PostPosted: Sun Apr 07, 2013 8:15 pm 
Offline
Team Axis

Joined: Fri Aug 17, 2012 1:18 pm
Posts: 435
Location: OKC
What motor and what altitude? I'd say maybe but it may take a pretty good while.


Top
 Profile  
 
 Post subject: Re: Acme 2079 prop
PostPosted: Mon Apr 08, 2013 2:36 pm 
Offline
Team Axis

Joined: Mon May 23, 2011 11:02 am
Posts: 1849
Location: Copperas Cove, TX
I know my A22 with standard engine struggles big time trying to get all ballast tanks, bow sack, two 750's, and wedge with crew of 4 using the 1235. I rarely ride that much weight and was more of an experiment.

_________________
2014 A24
2011 A22 (sad to see her go)


Top
 Profile  
 
 Post subject: Re: Acme 2079 prop
PostPosted: Mon Apr 08, 2013 3:58 pm 
Offline
Boater

Joined: Sat Nov 24, 2012 8:47 pm
Posts: 41
I put the 2079 on my boat and it brilliant! pulls like a tug boat! i used to have the 1235 on my a20 and i couldnt plain with full plug n play and wedge but now WOW heaps better on fuel too!


Top
 Profile  
 
 Post subject: Re: Acme 2079 prop
PostPosted: Mon Apr 08, 2013 5:19 pm 
Offline

Joined: Thu Apr 04, 2013 9:46 am
Posts: 6
Thanks so much for all the input. Looks like the 2079 is going to be the way I go!!!


Top
 Profile  
 
 Post subject: Re: Acme 2079 prop
PostPosted: Mon Apr 08, 2013 7:36 pm 
Offline
Team Axis

Joined: Fri Aug 17, 2012 1:18 pm
Posts: 435
Location: OKC
If you wait about another week, I will have my 2315 on and will give you some numbers and feedback.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 53 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 39 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: