It is currently Thu Mar 28, 2024 3:46 pm

All times are UTC - 6 hours





Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Acme 2773 prop vs 2419
PostPosted: Fri May 03, 2019 5:34 am 
Offline
Team Axis

Joined: Wed May 11, 2016 5:45 pm
Posts: 65
I have a 2014 t22 with a 2419 that needs repair.. I called acme and they recommended a 2773 prop its the same diameter of the 2419 which is a 15-12 and the 2773 is a 15-13.

does anyone run the 2773 on their boat?

They mentioned that the 2419 might be too aggressive and run at a higher RPM / and not needed I have the plug and play ballast with 800 bags in the rear...

any thoughts would be great..


Top
 Profile  
 
 Post subject: Re: Acme 2773 prop vs 2419
PostPosted: Sun May 05, 2019 4:09 pm 
Offline
Team Axis

Joined: Thu Jun 16, 2016 12:34 pm
Posts: 191
It's up to you whether it's too aggressive, the 2773 will run lower RPM than the 2419 but it will also not spin up the motor as high of RPM which may mean you lose power getting on plane, but I found the 2419 put the RPM way to high out of the hole and it went past the peak powerband of the engine. A lot of people like the 2773 as a good balance.

_________________
2016 Axis T23 w/410 ACME 2249 prop (WakeMakers 825# rear kit, WakeMakers ExactFit bow bag)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: Google [Bot] and 65 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: