Axis Wakeboard Boat Forum
http://axiswakeboardboats.com/

Installing rear bag vents on a 16 t22
http://axiswakeboardboats.com/viewtopic.php?f=14&t=4640
Page 1 of 2

Author:  nitrous1 [ Tue Jul 10, 2018 6:57 am ]
Post subject:  Installing rear bag vents on a 16 t22

What size is the factory ballast hose? Looked like 1"? Noticed a few post showing a 1 way valve, has anyone tried it without it? I need to get everything coming and the boat is at our cabin thanks for any help

Author:  steveA20 [ Tue Jul 10, 2018 6:30 pm ]
Post subject:  Re: Installing rear bag vents on a 16 t22

nitrous1 wrote:
What size is the factory ballast hose? Looked like 1"? Noticed a few post showing a 1 way valve, has anyone tried it without it? I need to get everything coming and the boat is at our cabin thanks for any help
If you are tapping into the drain line off the hard tank like this, yes you will want a 1 way check valve. Adding the check valve prevents the water to circulate back into the bag. It won't harm anything if you don't add it but it will take a lot longer to drain the bag and tank. Hose is 1&1/8th.ImageImage

Sent from my SM-G955U using Tapatalk

Author:  pilotflying [ Wed Jul 11, 2018 2:05 am ]
Post subject:  Re: Installing rear bag vents on a 16 t22

My setup is a little different but it works great as well:

I removed the vent hose from the hard tank and put it on top of the bag. Then I Y-ed into the fill hose and put one end on the hard tank (where it used to be) and one end on the other top port of the bag. Both bag drains go into the hard tank. Worked perfectly for the past 3 years in my 2014 A22.

So I only vent from the bag but I suppose that's fine since the air will always go out the top and can exit the hard tank via the two hoses that come from the bags (bag drains) and then out the bag vent.

Author:  nitrous1 [ Wed Jul 11, 2018 12:10 pm ]
Post subject:  Re: Installing rear bag vents on a 16 t22

Thanks, I got everything coming...... Hopefully, I ordered it all from wakemakers and you can't seem to get anyone in customer service on the phone and they didn't answer my question online, let's just say I'm less than happy with there customer service, but they've got the best selection of parts, so I'm stuck. Thanks again for the replies

Author:  r33pwrd [ Thu Jul 12, 2018 8:34 am ]
Post subject:  Re: Installing rear bag vents on a 16 t22

Is this just to keep the bags from trapping air? Getting tired or burping the bags myself..

Sent from my SM-G955U using Tapatalk

Author:  steveA20 [ Thu Jul 12, 2018 12:13 pm ]
Post subject:  Re: Installing rear bag vents on a 16 t22

r33pwrd wrote:
Is this just to keep the bags from trapping air? Getting tired or burping the bags myself..

Sent from my SM-G955U using Tapatalk
Yes, if you do this you can just forget about the bags until they start overflowing out of the drain and 3/4 hard tank through holes.

Sent from my SM-G955U using Tapatalk

Author:  r33pwrd [ Thu Jul 12, 2018 4:36 pm ]
Post subject:  Re: Installing rear bag vents on a 16 t22

steveA20 wrote:
r33pwrd wrote:
Is this just to keep the bags from trapping air? Getting tired or burping the bags myself..

Sent from my SM-G955U using Tapatalk
Yes, if you do this you can just forget about the bags until they start overflowing out of the drain and 3/4 hard tank through holes.

Sent from my SM-G955U using Tapatalk
Where is everyone buying the one way valve? Doing this to just rear bags or horseshoe front bag as well?

Thanks

Sent from my SM-G955U using Tapatalk

Author:  steveA20 [ Thu Jul 12, 2018 6:29 pm ]
Post subject:  Re: Installing rear bag vents on a 16 t22

r33pwrd wrote:
steveA20 wrote:
r33pwrd wrote:
Is this just to keep the bags from trapping air? Getting tired or burping the bags myself..

Sent from my SM-G955U using Tapatalk
Yes, if you do this you can just forget about the bags until they start overflowing out of the drain and 3/4 hard tank through holes.

Sent from my SM-G955U using Tapatalk
Where is everyone buying the one way valve? Doing this to just rear bags or horseshoe front bag as well?

Thanks

Sent from my SM-G955U using Tapatalk
Just the rear bags, wakemakers has everything you'll need.

Sent from my SM-G955U using Tapatalk

Author:  nitrous1 [ Fri Jul 13, 2018 6:31 am ]
Post subject:  Re: Installing rear bag vents on a 16 t22

Maybe check bakesonline, they don't have the selection of wakemakers but they do have the stuff and they're competent, wakemakers are still jacking me around and have zero customer service. My order has said processing for 2 days and no one answers the phone or replies online. I'm giving them today to get back with me,then I'm canceling and going elsewhere if I can even do that.

Author:  r33pwrd [ Sun Jul 15, 2018 7:55 am ]
Post subject:  Re: Installing rear bag vents on a 16 t22

nitrous1 wrote:
Maybe check bakesonline, they don't have the selection of wakemakers but they do have the stuff and they're competent, wakemakers are still jacking me around and have zero customer service. My order has said processing for 2 days and no one answers the phone or replies online. I'm giving them today to get back with me,then I'm canceling and going elsewhere if I can even do that.
Yea I'll just stop in there this week and see of they have them..

Sent from my SM-G955U using Tapatalk

Page 1 of 2 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/