It is currently Thu Mar 28, 2024 4:53 am

All times are UTC - 6 hours





Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Added Fatsacs to my T23
PostPosted: Mon Jun 18, 2018 10:14 am 
Offline
Newbie

Joined: Thu Mar 30, 2017 8:48 am
Posts: 26
So we purchased Fat sacs for the boat but have a few questions.

1- The fill hose coming from the hard tank is about a foot long, Do I need to shorten it to allow the bag to go back more?

2- If I shorten the fill hose the bottom front hose is going to be short it is already up under the seat. Do I add onto that one? I believe I would just need a 1.125 barb fitting and just use what I cut off the back end.

3- Of coarse there is no disconnects up front after removing the Y. What fittings does everyone use?

4- Is it recommended to install the side panel braces?

Thanks!!


Top
 Profile  
 
 Post subject: Re: Added Fatsacs to my T23
PostPosted: Mon Jun 18, 2018 10:22 am 
Offline
Team Axis

Joined: Sat May 09, 2015 7:39 pm
Posts: 110
Bryan1 wrote:
So we purchased Fat sacs for the boat but have a few questions.

1- The fill hose coming from the hard tank is about a foot long, Do I need to shorten it to allow the bag to go back more?

2- If I shorten the fill hose the bottom front hose is going to be short it is already up under the seat. Do I add onto that one? I believe I would just need a 1.125 barb fitting and just use what I cut off the back end.

3- Of coarse there is no disconnects up front after removing the Y. What fittings does everyone use?

4- Is it recommended to install the side panel braces?

Thanks!!


I have a t22 with 750s in the rear. I did have to cut my piping back for the bag to lay flat. I don’t recall adding any. I don’t know how your pipes come through. My hoses run together up the starboard side of the boat. I used all 90s to connect the bow bag. If I recall anything over 900lb bags should have the side bracing. I didn’t add it with my 750 and have been fine thus far. Good luck


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Added Fatsacs to my T23
PostPosted: Mon Jun 18, 2018 12:17 pm 
Offline
Team Axis
User avatar

Joined: Mon Oct 12, 2015 8:10 pm
Posts: 480
Location: San Tan Valley, Arizona
Bryan1 wrote:
So we purchased Fat sacs for the boat but have a few questions.

1- The fill hose coming from the hard tank is about a foot long, Do I need to shorten it to allow the bag to go back more?

2- If I shorten the fill hose the bottom front hose is going to be short it is already up under the seat. Do I add onto that one? I believe I would just need a 1.125 barb fitting and just use what I cut off the back end.

3- Of coarse there is no disconnects up front after removing the Y. What fittings does everyone use?

4- Is it recommended to install the side panel braces?

Thanks!!
What size rear fat sacs did u purchase? What year is the boat?

Sent from my SM-G955U using Tapatalk

_________________
2003 Sanger V210....SOLD
2005 MC X2....SOLD
2006 MC XSTAR....SOLD
2016 AXIS A20....SOLD
2018 AXIS T22....CURRENT


Top
 Profile  
 
 Post subject: Re: Added Fatsacs to my T23
PostPosted: Mon Jun 18, 2018 1:22 pm 
Offline
Newbie

Joined: Thu Mar 30, 2017 8:48 am
Posts: 26
Didn't think about that.... 2015 T23 purchased 1100# rears and nobody really gives the weight for the bow sac. What size is the tubing? 1.125 if my memory is correct.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 64 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


cron