Axis Wakeboard Boat Forum http://axiswakeboardboats.com/ |
|
Did I purchase the correct spark plugs? http://axiswakeboardboats.com/viewtopic.php?f=14&t=4394 |
Page 1 of 1 |
Author: | slickrock22 [ Sun Sep 10, 2017 10:32 am ] |
Post subject: | Did I purchase the correct spark plugs? |
I have a 2013 axis a 22 . I was reading the owners manual and it specified two different spark plugs, one of which was the MR43LTS. That is the one I purchased and I'm getting ready to replace all eight. I read on line that some suggested that that is only for the non-catalyze engines. I have the monsoon 330. I noticed also that there are gap specifications in the instructions. Will the MR43 LTS work as is or do I need to buy different spark plugs? I have no idea what the standard gap is from the factory. Thank you for any insight. Sent from my iPhone using Tapatalk |
Author: | slickrock22 [ Mon Sep 11, 2017 9:36 am ] |
Post subject: | Did I purchase the correct spark plugs? |
slickrock22 wrote: I have a 2013 axis a 22 . I was reading the owners manual and it specified two different spark plugs, one of which was the MR43LTS. That is the one I purchased and I'm getting ready to replace all eight. I read on line that some suggested that that is only for the non-catalyze engines. I have the monsoon 330. I noticed also that there are gap specifications in the instructions. Will the MR43 LTS work as is or do I need to buy different spark plugs? I have no idea what the standard gap is from the factory. Thank you for any insight. Sent from my iPhone using Tapatalk Just spoke to Indmar and they stated that I need to use the 41-101. Sure would've been nice if axis would've got the specs correct in the manual |
Author: | Lumbergh [ Wed Sep 27, 2017 9:07 am ] |
Post subject: | Re: Did I purchase the correct spark plugs? |
I just replaced my spark plugs on my 330 monsoon. 41-101 from any auto parts store will work. mine were 5$ each after rebate. Check the cross reference and see if yours match 41-101. I recommend you buy the 41-101's and take both to your boat, then see if they match physically once you start removing the old ones. It wouldn't be fun to punch a hold through your piston just because the spark plug length was off. These plugs DO NOT come pre-gapped like more modern spark plugs. i had to bend all mine in to the gap specified in the Indmar manual (.40'). the carbureted ones are gapped to .30'. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |