| Axis Wakeboard Boat Forum http://axiswakeboardboats.com/ |
|
| T23 ballast setup http://axiswakeboardboats.com/viewtopic.php?f=14&t=3333 |
Page 12 of 14 |
| Author: | kaotic818 [ Wed Aug 30, 2017 11:43 am ] |
| Post subject: | Re: T23 ballast setup |
BTW the wake makers engine dividers work very well. |
|
| Author: | agarabaghi [ Wed Aug 30, 2017 11:43 am ] |
| Post subject: | Re: T23 ballast setup |
do you know what size are the ones that come with the boat? |
|
| Author: | agarabaghi [ Wed Aug 30, 2017 11:45 am ] |
| Post subject: | Re: T23 ballast setup |
yea i have the engine dividers from my old boat. but these sacs fill up infront of the engine compartment towards the bow, and then fill up a good bit, maybe 6-10" of space left when the door shuts. |
|
| Author: | kaotic818 [ Wed Aug 30, 2017 12:30 pm ] |
| Post subject: | Re: T23 ballast setup |
Please post pictures if possible. I have the 2016T23 unless they changed the setup should be the same. Mine go under the seats abit in the rear as well as fill up the back lockers. |
|
| Author: | agarabaghi [ Wed Aug 30, 2017 1:00 pm ] |
| Post subject: | Re: T23 ballast setup |
kaotic818 wrote: Please post pictures if possible. I have the 2016T23 unless they changed the setup should be the same. Mine go under the seats abit in the rear as well as fill up the back lockers. sounds the same. do you know the claimed lbs of those? |
|
| Author: | steveA20 [ Wed Aug 30, 2017 4:23 pm ] |
| Post subject: | Re: T23 ballast setup |
agarabaghi wrote: Im trying to figure out what size bags i have in the back of my 2017 T23. They are def custom made for this boat as they look kind like an upside down L ? Are these the 1100s? What brand are they? Sent from my SM-G955U using Tapatalk |
|
| Author: | A22man [ Wed Aug 30, 2017 8:35 pm ] |
| Post subject: | Re: T23 ballast setup |
kaotic818 wrote: Currently it doesn't completely plane since all we mainly do is surf 10.8-11.2 MPH. Ive added more led today hopefully it planes more. I noticed the 1235 the stock prop was 36-3800 RPM and now the 2313 Prop is max 4k RPM which is cruising speed. I Plan to try to get up to wake boarding speed tomorrow im testing the 2313 still. If im not happy my prop guy will happily exchange it for the 2315. I run the wedge but i'll try without tomorrow . Hey kaotic just wondering if any luck with that 2313 prop or did you switch to a 2315? |
|
| Author: | agarabaghi [ Thu Aug 31, 2017 6:52 am ] |
| Post subject: | Re: T23 ballast setup |
steveA20 wrote: agarabaghi wrote: Im trying to figure out what size bags i have in the back of my 2017 T23. They are def custom made for this boat as they look kind like an upside down L ? Are these the 1100s? What brand are they? Sent from my SM-G955U using Tapatalk I will check next time we are in the boat. Im starting to believe the dealer now that he said they are 1100s since when running ... 7x 40lbs lead under the 625 sac in the nose, 5x 50lbs lead in the walk way 2x 50lbs in the storage under glove box, wedge, pnp and stock filled with 2 people in the nose and 3 people in the cabin are and she was pushing 4000k rpm at wakeboard speeds and the drone shots were showing a good bit of the front of the boat out of the water. might keep moving weight up front or try with out the wedge.... wake was pumping though! |
|
| Author: | kaotic818 [ Thu Aug 31, 2017 6:24 pm ] | ||
| Post subject: | Re: T23 ballast setup | ||
Sorry for late response. The prop works awesome here is a picture. I dont really wakeboard but the wake surf wave is almost chest high on some riders.
|
|||
| Author: | crashleroux [ Tue Sep 05, 2017 10:59 am ] |
| Post subject: | Re: T23 ballast setup |
Now comes the question, how much difference is there in between the 2313 and 2315? I need to swap out to one or the other. |
|
| Page 12 of 14 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|