It is currently Thu Mar 28, 2024 2:40 pm

All times are UTC - 6 hours





Post new topic Reply to topic  [ 118 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9, 10 ... 12  Next
Author Message
 Post subject: Re: Winterizing Your Axis
PostPosted: Sat Oct 11, 2014 10:59 am 
Offline
Team Axis

Joined: Fri Aug 17, 2012 1:18 pm
Posts: 435
Location: OKC
I usually add about 2 cups of liquid bleach to my bags and tanks to help prevent alge growth.


Top
 Profile  
 
 Post subject: Re: Winterizing Your Axis
PostPosted: Sun Oct 26, 2014 3:55 pm 
Offline
Team Axis
User avatar

Joined: Mon Sep 23, 2013 4:01 pm
Posts: 1386
Location: Knoxville
I don't think the 330 has the knock sensors. Mine doesn't. Anyways, I did all of the stuff mentioned above except I put back in all the drain plugs and sacrificial anodes and ran straight rv antifreeze through the system. It took about 3 gallons but it gives me a warm fuzzy knowing additional corrosion is not going on inside the coolant system. I also poured antifreeze down all of the ballast tanks and made the center tank suck some antifreeze into it.


Top
 Profile  
 
 Post subject: Re: Winterizing Your Axis
PostPosted: Sun Oct 26, 2014 7:46 pm 
Offline
Team Axis

Joined: Sat Jun 21, 2014 6:27 pm
Posts: 172
Location: Parker Strip, AZ
Wow that seems like a lot of work. And then you don't even play with it for a long time. My winterizing consists of stashing a couple of sweatshirts into the storage area below the glove box. It seems to last all winter. Then in the spring we take them back out until the next winter.

Nice living where we do not have freezing temperatures.


Top
 Profile  
 
 Post subject: Re: Winterizing Your Axis
PostPosted: Sun Nov 09, 2014 3:09 pm 
Offline
Team Axis

Joined: Wed Apr 30, 2014 5:13 pm
Posts: 159
Location: BumpASS, Vagina
2014 T22 ... 5/8" garden hose connection, the only thing that I see is this. Looks like it connects to the dripless shaft connection. The hoses come off the exhaust manifold then T into a single smaller hose. There's no garden hose connector correct?


Attachments:
20141109_143725.jpg
20141109_143725.jpg [ 349.01 KiB | Viewed 50105 times ]
20141109_143651.jpg
20141109_143651.jpg [ 419.92 KiB | Viewed 50105 times ]
Top
 Profile  
 
 Post subject: Re: Winterizing Your Axis
PostPosted: Mon Nov 10, 2014 8:41 am 
Offline
Team Axis

Joined: Sun Jun 17, 2012 5:29 pm
Posts: 207
Winterized yesterday, haven't done it myself in a few years. Step 1 took me an hour because I forgot the post was from an 09-11 and I have a 12. Breezed through everything after that. Just need to find a good battery charger now.... and wait for the warmth!

_________________
store.kultureva.com
2012 A20
Poor Gate Equiped


Top
 Profile  
 
 Post subject: Re: Winterizing Your Axis
PostPosted: Mon Nov 10, 2014 10:25 am 
Offline
Team Axis

Joined: Mon May 23, 2011 11:02 am
Posts: 1849
Location: Copperas Cove, TX
VAstyle wrote:
Winterized yesterday, haven't done it myself in a few years. Step 1 took me an hour because I forgot the post was from an 09-11 and I have a 12. Breezed through everything after that. Just need to find a good battery charger now.... and wait for the warmth!


Onboard charger or just a trickle charger?

_________________
2014 A24
2011 A22 (sad to see her go)


Top
 Profile  
 
 Post subject: Re: Winterizing Your Axis
PostPosted: Mon Nov 10, 2014 9:40 pm 
Offline

Joined: Sun Nov 09, 2014 6:34 pm
Posts: 17
Thank you Walter for a very thorough post. I just got a 2010 A22 last weekend and have never winterized a boat before so I am a bit anxious. Could you post a photo of where you unplug the ignition coil? Also, can you tell me why the local shops around me add marine anti-freeze after draining all the water?


Top
 Profile  
 
 Post subject: Re: Winterizing Your Axis
PostPosted: Tue Nov 11, 2014 3:28 pm 
Offline
Team Axis
User avatar

Joined: Mon Sep 23, 2013 4:01 pm
Posts: 1386
Location: Knoxville
ironmike wrote:
Thank you Walter for a very thorough post. I just got a 2010 A22 last weekend and have never winterized a boat before so I am a bit anxious. Could you post a photo of where you unplug the ignition coil? Also, can you tell me why the local shops around me add marine anti-freeze after draining all the water?

Its actually RV antifreeze after draining. It is about $4/gallon at walmart. Probably cheaper somewhere else if you can find it. The antifreeze is added to prevent internal corrosion of the cooling system. When the internal components are exposed to air that has moisture it it, it causes the internals to corrode faster than a cooling system with water or antifreeze in it.


Top
 Profile  
 
 Post subject: Re: Winterizing Your Axis
PostPosted: Wed Nov 12, 2014 7:08 am 
Offline
Team Axis

Joined: Wed Apr 30, 2014 5:13 pm
Posts: 159
Location: BumpASS, Vagina
Whats the deal with the garden hose connector on the 2014 T22? Mine doesn't have one ... am I missing something?


Top
 Profile  
 
 Post subject: Re: Winterizing Your Axis
PostPosted: Wed Nov 12, 2014 10:45 am 
Offline

Joined: Mon Sep 15, 2014 5:44 pm
Posts: 12
I also do not have the connector, Just removed the clamp and drained at the T

Is it alright to just remove the knock sensors or do the plugs they bolt into also need to be removed?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 118 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9, 10 ... 12  Next

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 79 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: